November 29, 2024
EarthQuaker-Devices-Unveils-the-Blumes®-Low-Signal-Shredder

We only recommend products that we use and believe in. When you purchase through links on our site, we may earn an affiliate commission.

EarthQuaker Devices is excited to announce the launch of their first overdrive pedal designed specifically for bass guitar.

Behold the mighty Blumes® Low Signal Shredder! This all-analog tri-mode overdrive with soft clipping carries the torch of the classic screamer circuit but has a voice all its own. And thanks to its bipolar power, you’ll get more dynamics, clarity, and all the headroom you could ever desire. The end result is a more three-dimensional tone with added clarity that really pushes a nice tube amp over the edge.


While embodying most of the kick ass characteristics and features of the Plumes® Small Signal Shredder, this modified circuit has double the gain and a deeper bass response to retain all the low end. At lower gain settings, you’ll get all of the crunchy tone you love about the original, but once you get above noon on the Gain control, that’s where the similarities stop. Now you’re in bass country, baby! Get ready to shake some walls and field some angry calls from your neighbors (just send them to voicemail).

And much like the Plumes, this pedal offers three different clipping options for your desired low end face melting needs.

Mode 1 is symmetrical LED clipping that utilizes a pair of light emitting diodes. This is the crunchiest setting the Blumes has to offer. This signal is less compressed and way more open with tons of output for when you really want to go wild.  

Mode 2 is a clean pure OpAmp gain boost mode. This eliminates the soft clipping diodes altogether and leaves you with straight OpAmp drive. This will be the loudest output with the fullest frequency response, which can be used as a clean boost when the Gain control is set below 11 o’clock.

Mode 3 is an asymmetrical silicon diode arrangement similar to the stock screamer but with more output and clean clarity, which provides more transparent tone. Using this mode gives a warmer low-end response and lower output. It’s fuzzier with half the output and is the most compressed. If you like the fuzzy ends of distortion with a clean undertone, you’ll love this setting. We guarantee it.

Each Blumes pedal is forged in the deepest, lowest caverns of Akron, Ohio, USA and comes with a lifetime warranty.

Tech Specs

  • Bass overdrive based on a modified Plumes
  • Deep bass response
  • Twice as much gain as the Plumes
  • Features 3 different clipping options: symmetrical LED, asymmetrical silicon, and no diode OpAmp drive
  • Operates on internal bipolar power for more headroom and signal integrity
  • All-analog signal path
  • True bypass
  • Silent relay-based switching with Flexi-Switch® Technology
  • Lifetime warranty
  • Current Draw: 25 mA
  • Input Impedance: 10 MΩ
  • Output Impedance: 100 Ω
  • USA Retail Price: $99.00

About The Author

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Verified by MonsterInsights