MikesGig features affiliate links to help support our content. At no cost to you, we may earn a commission on affiliate purchases.
Stereo inputs, dual XLR outs, an aux input, active EQ, and an all-analog signal path make the Stereo Easy Listening guitar pedal a serious option for silent practice, recording, and ampless live rigs.
Sometimes guitar players actually know what they want.
- Stereo.
- XLR outputs.
- An aux input.
- More control.
And the ability to plug in, put on headphones, and play without turning a bedroom into a noise complaint.
EarthQuaker Devices listened.
The Akron pedal maker has expanded its popular Easy Listening Analog Amp Simulator with the new Stereo Easy Listening—an all-analog amp and speaker-cab simulator built for players who want more from the end of their signal chain.
More flexibility.
More outputs.
More stereo.
And still no menus, IR loading, or software updates.
“Very rarely do I alter a design based on customer feedback, but this was one of those times where the ideas were just too good to ignore.”
— Jamie Stillman, EarthQuaker Devices Founder and President
What is Stereo Easy Listening?
The original Easy Listening made its name as a simple all-analog headphone amp with speaker-cab simulation. Stereo Easy Listening takes that core idea and gives it a much wider job description.
- Use it for silent practice.
- Send it straight into a recording interface.
- Run direct to front of house.
- Add it to a stereo pedalboard.
- Or use it as the final analog stage in a digital modeling rig.
The pedal accepts stereo signals through dual quarter-inch inputs and can send them to dual XLR outputs, a stereo headphone output, or both.
Stereo in. Stereo out.
For players running stereo delays, reverbs, modulation, or full stereo rigs, preserving the width of the sound matters.
Stereo Easy Listening is designed to keep that image intact.
- Plug in left and right.
- Keep the spread.
- Send the signal where it needs to go.
- No complicated routing matrix required.
For mono players, plugging into the left input creates two identical, independent preamp paths with analog speaker-cab simulation.
That means one guitar signal can become a bigger, wider dual-amp-style sound.
The aux input makes practice easier
The Stereo Easy Listening adds a dedicated auxiliary input with its own level control.
- Connect a phone.
- A computer.
- A drum machine.
- A backing-track player.
Then play along through headphones without needing extra mixers, adapters, or a separate practice rig.
The aux signal stays unprocessed, preserving the sound of the backing track while the guitar gets the pedal’s analog amp-and-cab treatment.
Simple.
Useful.
Exactly the kind of feature that makes a pedal earn permanent board space.
More control over the sound
The pedal includes a three-band active EQ with Bass, Middle, and Treble controls.
EarthQuaker says the foundational voice draws from a classic American amp, while the active EQ gives players room to explore British-style tonal territory as well.
That means the pedal is not locked into one narrow flavor of clean amp sound.
It is a platform.
Start clean.
Add fuzz.
Add gain.
Build a rig around it.
Or use it to make direct recording feel a little less like staring at a computer screen.
All analog, on purpose
This is not a digital modeler.
There are no presets.
No profiles.
No firmware updates.
No hunting through menus for a virtual microphone placement you forgot you created at 1:30 in the morning.
Stereo Easy Listening is 100% analog.
It is built to sound and respond like a miked amp without requiring an actual amp, microphone, or treated room.
“In the end, it definitely exceeded my expectations.”
— Jamie Stillman
Built for late-night recording and live performance
The pedal offers enough clean headroom to work with vintage fuzz, modern gain stages, and hot signals without falling apart. That makes it useful for more than headphones.
A player can track direct into a DAW.
Send a consistent signal to front of house.
Or add an analog finishing touch to a digital setup.
For musicians who need good tone without a full amp-and-mic setup, that can remove a lot of friction.
And less friction means more finished songs.
EarthQuaker Devices Stereo Easy Listening specs
| Feature | Spec |
|---|---|
| Signal path | 100% analog |
| Inputs | Dual ¼-inch inputs for stereo operation |
| Mono operation | Left input creates two independent analog preamp/cab-sim paths |
| Outputs | Dual XLR outputs and stereo ¼-inch headphone output |
| Aux input | Stereo ¼-inch TRS; tip = left, ring = right |
| Aux control | Independent level control |
| EQ | Three-band active EQ: Bass, Middle, Treble |
| Controls | Level, Auxiliary level, Bass, Middle, Treble |
| Input impedance | 1 MΩ |
| Aux input impedance | 1 MΩ |
| Headphone output impedance | 10 Ω |
| XLR output impedance | 100 Ω |
| Current draw | 200 mA |
| Warranty | Lifetime warranty |
| USA MAP price | $249 |
Where to buy:
The MikesGig takeaway
Stereo Easy Listening is for guitarists who want a real-world solution.
Not another screen.
Not another account.
Not another update.
Just a flexible, all-analog way to practice silently, record quickly, play live without an amp, and keep a stereo rig sounding like a stereo rig.
MikesGig — Gear Moves Music. Music Moves People.
About The Author
